I have started working on a 3D house model in 3Ds max, so I thought I should keep a record of the progress as I continue to model the 3D house towards completion. You should check back on this post as I will be upgrading it from time to time when I make any major changes.
I started working on this 3D model in 3Ds max from a house plan. The house has a garage and others rooms you might find in an average traditional house. I am free modelling this object, so there is not any special measurements applied just observation. I started from a simple box the continued to extrude it to map it to the floor plan. After mapping it I then extruded it upwards until the height you see. The roofs I just used a box again and connected each in half using Continue reading →
I have just created this 3D cooking pan object in 3D max Studio. The 3D model was very easy and quick to create. I started from cylinder, then converted to a Editable poly. Then I continued to edit the cylinder surface. Using the extrude and connect tools. It was very quick and straight forward.
If your would like to download this free 3D object use the button below and use it in which ever way. Please leave me a comment below.
![\"3d](\"http://www.caciocode.com/wp-content/blogs.dir/1/files/3d-models/3d_cooking_pan_1.png\")
Continue reading →
This 3D model was created in 3Ds max studio. It took a very short amount of time to complete. I used the sphere, then cut it in half. applied the shell modifier then collapsed it. I continued to adding the stand using extrude. Finally I applied the MeshSmooth modifier after correct a few geometry mistakes.
If you would like to down load this object for free scroll down and click on the Download model button.
Enjoy!
![\"3D](\"http://www.caciocode.com/wp-content/blogs.dir/1/files/3d-models/thumbs/thumbs_3d-chair1.png\")
![\"3D](\"http://www.caciocode.com/wp-content/blogs.dir/1/files/3d-models/thumbs/thumbs_3d-char2.png\")
![\"download](\"http://www.caciocode.com/wp-content/uploads/buttons/download_3d_model.png\" "\\"download")
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/08/3d-rubbish-bin-trash-model-object1.jpg\" "\\"3D")
Just modelled a really simple Rubbish trash can. The bin was modelled in 3Ds max studio using box modelling. It was very quick to complete. I late applied the shell modifier to create the inside of the object. The modifier levels are still there in the modifier stack if you happen to download this 3D model.
You can download this 3D model to use for your needs absolutely. Just remember to leave me a comment below letting me know what you think about the 3D object. If you would like me to create a 3D tutorial version of this 3D model just let me know as well in the comment section.
![\"Quick](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/08/3D_text_tutorial1.png\" "\\"Quick")
In this very simple 3D text tutorial I’ll be showing you how to use the 3Ds max text shape together with the bevel modifier to create 3D text. This tutorial is suitable for an absolute beginner. If you would prefer to walk through this tutorial quickly scroll down to the quick tutorial summary which concentrates on getting the 3D text complete than the details of learning. Now the most important area of this all topic is the Bevel modifier and I shall give you a detailed description of the Bevel modifier below. Continue reading →
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/08/3d_mouse_model_object1.jpg\" "\\"3D")
I have just created a much more advanced 3D object than the other 3D models that I have submitted here before. As you can see my skills are getting better. I started creating from a box object then halved it and applied the Symmetry modifier followed by the Meshsmooth and the shell modifiers. I actually thought it would take me a very long time to complete but it was easy and quick to finish. This is the type of mouse that I’m using on my HP laptop where I modelled this 3D model from. It is not very accurate to the actual really life mouse but has a very good overall shape of the mouse. There are some minor geometry errors as well, as you might see if you happen to download the 3D model and look carefully.
If you would like to use this model and use it, please do so as you’re welcome. The actual model in the file hasn’t been collapsed so the modifiers are still there at each level and you can go in and make your own adjustments if you wanted to. Expect to see more.
If there is an object that you might like to see me create in the future, please suggest the object below in the comment section and I will try it.
I have just created more 3D lamp models; again they were really simple and quick to create. I used cylinders mostly then positioned and edited them in place.
If you would like to download this object and use it, you’re welcome. These are all free 3d models.
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/08/3d_lamp_models1.png\" "\\"3D")
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/07/3d-lamp-object-model1.png\" "\\"3D")
This was a quick continuation of my 3D and Animation practice. This 3D lamp object was created in 3Ds max. This was done using the box shape and the cylinder. It was really quick. In future you shall see some really complex lamps that I shall be modelling. I recently purchased some 3D max training DVDs so this should speed up my learning!
You’re welcome to download and use this 3D model if you want.
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/07/3d-model-bottle-object-2-3D-modelling-and-animation-beginner1.png\" "\\"3D")
I am continuing part of my 3D and animation training. This 3D model bottle was created in 3Ds max. This is another simple yet more involved 3D modelling. I used the common tools of the Editable modifier and I applied the shell and MeshSmooth modifier. The all process was quite easy but I became more adapted and gained further confidence on the subject.
You can download the 3D model and use for free. Let me know what you think.
![\"3D](\"http://www.3danimation.caciocode.com/wp-content/uploads/2010/07/3D-model-bottle-object1.png\" "\\"3D")
This is part of my training in 3D and Animation. I have just created a 3D model bottle. In this practice the object was quite advanced. I also explored the materials tool. Soon enough I shall be able to create some really advanced and complex 3D models. This was made from a box, I then modified the box using the Editable poly modifier. I l also used 2 circle shapes to trace/merge them on the object to create the bottle mouth and the extruded area below. The other modifiers I used were the shell and the smooth modifiers to finish of the object.
You’re welcome to download the model and use as you want. There are two versions in the file, one has a material applied and the other doesn’t You’ll have to unhide the one without the materials. The 3D model has lots of errors and it’s not very clean/neat.
![\"3D](\"http://www.caciocode.com/wp-content/blogs.dir/1/files/3d-models/3d-chair1.png\")
![\"3D](\"http://www.caciocode.com/wp-content/blogs.dir/1/files/3d-models/3d-char2.png\")